top of page

Budget desktop case for your DIY Synth or Eurorack Modular. Flatpack kit includes 2 end panels laser cut from 12mm birch ply, front and back panels, which are 9mm birch ply and the base which is 3mm birch ply.Also contains 8 x Allen screws and washers.

The supplied front back and base give a usable width of 48 hp or 273mm but as these parts are simple rectangles its easy to customise to your onw desired width.

The internal depth is 65mm at the front and 82mm at the back.

The Front and back panels leave an internal gap of 110mm and line up externally with standard eurorack panels (128.5mm)

bottom of page