top of page

void drums (int i = MILES) {

if (Rythym_VANDALISER == TRUE) {

TR_707 = TR_707 + CV_707;

drums = sorted &&

myGlitch > yrGlitch + i ; } }

DSC_0292 (1).JPG
This code was originally written for the 707 but could be used to sequence glitch's and bends on any project.
The arduino recieves the SYNC24 signal from the 707, this runs a 16 step sequencer with RGB NeoPixel display and outputs to 4 signal relays for the patch bay, 2 DACs for CV out and some Gate outs for your modular rack. Fully programmable via 1 encoder and 1 arcade button.
bottom of page